front bracket station feet: to make the machine more stable
Comfortable handle height: adjust the armrest heightConvenient tool box: convenient to displace the spare parts
Emergency handle:the blade will stop working to protect the safety of personnel.
Throttle switch: Turn right to open a large, open a small left turn.
The flexible and lightweight, easy to use
farming capacity is 0.8-1.2 mu per hour plowing width and depth
tilling width:3 group is 800mm;
3+1 group is 1010mm;
using sandblasting prevent the fuel tank from the corrosion. the tank covers a peripheral seal, and is equipped with air filters,which can inject the oiling and change of the air , in addition,it can keep the oil clean.the Muffler weakens the working noise , reduces the labor intensity, and the anti-scald devices can prevent people from burning..
1.The machine functions and features:The Tiller has a small size, light weight, multi-function, high-efficiency.facilitate to transfer, the rotation is flexible.
2.product profile:The main technical parameters
Meiqi170DS / 173DS diesel power tiller
170F / 173F;air-cooled gasoline
3.5kw : 5.5 horsepower / 4.05kw : 6.5 horsepower
Packing size (L × W × H)
standard 4 piece 4 group dry- land blade,350-6 walking wheel
3.radom configuration:4 piece 4 group dry-land blade,350-6 walking wheel,tool bag,instruction(depends on customer's requests, it can equip with the ridging blade,ditching blade,ect)
4.The machine is small, light weight, multi-function, high-efficiency. it can go to the mountain and the paddy, go over the ridge and the groove,it facilitate to transfer, and the rotation is flexible. It applies to the hills, flat dry land, paddy fields, orchards, vegetable gardens and flowers. the Rotary and the ditching ridge are their basic functions, equipping with the corresponding equipment, it can be used in the water pumping, irrigation, spraying, harvesting, power generation, fertilization, planting, threshing, cutting vine, grinding and so on.
dry-land blade 4 pieces 4 groups
tire 1 pair
trimming wheel 2 pieces
2 pieces anti-wind blade 2 pieces
crawl plat 2 pieces
ditching blade 1 piece
deep hole 2 pieces
3 pieces anti-wind blade 2 pieces
3 pieces 3 groups blade 2 pieces
small paddy filed wheel 2 pieces
3 pieces blade 2 pieces
4 pieces tool bit 2 pieces
small paddy filed wheel 2 pieces
crawl wheel 2 pieces
1.Transactions: We recommend the payment by alipay.if you don't have, you can contact our customer service by direct payment. The customer of COD must pay a deposit in advance.
2.About shipping: since the machinery and equipment is heavy, the freight is relatively high. Generally speaking, shipping is a common method. We promise we will not earn a penny on shipping! please consult the relative shipping cost after you have choosed the model. Accordance with the different region, the price has a large difference.,.
3. About Shipping: we will delivery the good within 48 hours. After having received the goods, please check out the package, if there is a significate and crushed traces, please contact us immediately!.
in order to facilitate the use of customer, we have installed and tested before selling.
The procedure of power tiller.
1.install the wheel put the wheel into their drive shaft ,take two bolt,cotter to fix.
2.The installment of handle making the fluted disc of handle and the armrest frame face to face, the bolt passes from left to right,adjust the position of handlebar and lock it by the clamp handle.
3.install the rear bracket
4.fix the front bracket
5.the installment of fender fixed by the bolt and nut
6.put the link span on the trailer..
7.install the shift lever
8.fix the air filter by the bolt
1.the preparation of starting engine
add the lubricant oil to the engine and the gear boxoil capacity 0.75L
add the lubricant oil to gear box,SAE15W-40 engine oil (recommanded).
1.0 or -10,-20 diesel(fule oil capacity 20.5L)2. add the cleanser to lacquer tray until the oil level line.
2.launch the engine
1.open the white fuel tap,set the speed handle to start.
pull the start handle until the peak,then put it back slowly..
push the button decompressor, drag out of the start ,the machine will start.
the new diesel power tiller has 20 hours run-in period,the operator has to abide by 3 standard,otherwise it will reduce the lifetime of machine.
1.the tiller need to a 5 min engine operate at the first time.
2. the engine has to keep low-load operation before the engine hot .
3.change the engine oil in time.
during the working time, since the operation and abrasion, or the change of load. It is inevitable to produce the phenomenon of wearing, and it will lead to decrease the engine power. In order to avoid the above-mentioned, it is necessary to do a good maintenance work.
the new power tiller need to work 1 hour in the case of no load, after working 5 hours, the all lubricant in the gearbox and engine crankcase should be exhausted.
maintenance instruction of tiller
(one)maintenance after/before operating
check the flue oil in the flue tank,the engine oil of engine and transmission; the water-cooled engine need to notice the cooling water in the water tank.
1.check and adjust the belt.
2. Check and inspect weather it has abnormal phenomenon(abnormal noise,too hot and so on).
3.examine if it has the leakage of engine and wheel box.
4.make sure the oil level in a right place.
5,clean up the machine and accessories,weeds and oil stain timely.
6,take the farming notes.
(two)primary maintenance(working 150 hours per day)
1,make a general maintenance.
2,clean up the wheel box and changethe oil.
3,examine and adjust the clutch,shift system.
(three)secondary maintenance(working 800 hours)
except the daily maintenance,we should do following job:
l,make a overall maintenance after 150 working hours.
2,check all the gear and bearing,change a new one if has a serious wear.
3,please change a new one if the other spare parts of power tiller has spoiled.
1,disassemble and clean the machine at after-service station. At the same time, the spare parts should be changed and repaired when necessary.
2,serciveman examines the wearing spare parts and clutch.
3,change the rotary blade.
the long-term deposit of machine:
In order to avoid the corrosion,the following messure should be done:
1,mothball the diesel engine according to the instruction.
2,clean the dust and dirt.
3,Let the lubricant out,and inject the fesh oil.
4,wipe the antu-rust oil on the non-aluminium alloy.